16 November, 2026
How Do I Drain a Toilet? Step-by-Step for Aussie Homes
Wondering how do i drain a toilet before a replacement or repair? Learn the steps and know when to call a licensed plumber for the job.
### Why Am I Asking How Do I Drain A Toilet?
You probably aren't asking how do i drain a toilet just for fun, I'd guess. In my experience, most people ask me how to drain a toilet because they're about to replace a toilet, or perhaps their old toilet pan is cracking and leaking out the bottom. Maybe they have noticed a leak coming from either the wall or floor where the toilet used to sit. Perhaps they are doing some renovations and they need to pull out the old toilet before the new tiles go down. Either way, let's take a look at how we can tackle this.
You should keep in mind that draining a toilet is two separate jobs. The first one is something you can do yourself, and the second one requires a licensed plumber. The first part involves turning off the water supply and draining the water out of the cistern and bowl. The second part involves disconnecting the pan from the waste.
The first thing you need to do before draining the toilet, is figure out what outlet type you have. This will be important for several steps along the way.
Pulling out an old toilet looks simple until you realise there's water everywhere and a licensed plumber's job waiting underneath. In my experience, draining a toilet is really two separate jobs: the first part involves turning off the water supply and draining the water out of the cistern and bowl, which you can absolutely handle yourself, and the second part involves disconnecting the pan from the waste, which is strictly a licensed plumber's task in every state and territory. Before you touch anything, though, you need to figure out whether you've got an S-trap or P-trap, because that decision shapes every step that follows.
Video Credit: The Funny Carpenter
S-Trap vs P-Trap: Identifying Your Toilet's Outlet
Take a peek at the area behind your toilet pan. If the waste pipe comes out the bottom of the pan and goes down into the floor, you have an S-trap, also known as a floor outlet. If the waste pipe comes out the back of the pan and goes into the wall, you have a P-trap, also known as a wall outlet. Both are valid and legal options here in Australia, one isn't better than the other, it's just a matter of where your waste pipe is coming from in your bathroom.
The measurements are taken differently for both options. For an S-trap, the measurement is taken from the finished wall to the centre of the floor outlet, and 180mm is the most common set-out you'll see available, though 160mm and 140mm are also common. For a P-trap, the measurement is taken as a height from the finished floor to the centre of the wall outlet, and 185mm is the most common. If you mix these up, you'll buy the wrong one.
If you've established what outlet type you have, you can then proceed with the steps you can carry out yourself.

The DIY-Safe Steps: Turning Off Water and Emptying the Bowl
This is the part I'm very comfortable walking you through, because it really is a DIY job. Firstly, locate the isolation valve (the tap that supplies water to the cistern), which should be located either on the wall or floor behind the toilet, and turn the tap clockwise to close the water supply. Then flush the toilet to empty the cistern, and you may need to do this twice if the valve was only partially shut.
Then, for the bowl itself, use an old sponge or a cup to bail out any remaining water, and wipe away any residue with a towel. If you have a wet-dry vacuum, that'll make light work of it. Beyond that, you're done.
To reiterate, the plumbing associated with bathrooms must be performed by a licensed plumber in all states and territories. This includes detaching a toilet pan from the waste. There's no ambiguity here, and it doesn't differ by postcode.
At this stage, with the cistern and bowl empty, the onus falls onto the licensed plumber to detach the pan.

What Happens Next: Pan Removal and the Toilet Waste Connection
When the plumber arrives, they'll unscrew or unbolt the pan, lift it clear, and then detach it from the existing pan collar or connector connecting it to the toilet waste. Plumbing connections need to comply with the required fall and jointing provisions in the plumbing code. This is another reason why this isn't a DIY weekend task: a mistake could result in leaks beneath the floor, not just a loose toilet.
After removing the old connection, the plumber will check the waste outlet, clean the area, and get it ready for the new connection. Most homeowners probably ask themselves how do i drain a toilet at this point, when what they really want to know is how to prepare for the plumber, which is a question best asked beforehand.
When the old connection is removed, the next step is choosing the right connector for the new connection.

Choosing the Right Pan Connector for Your Toilet
The plumber will select the pan connector based on your outlet type and set-out. A universal connector with a cutting line will work for a slightly different set-out, and there are also extended versions available for toilets located further from the wall than normal. For repairs instead of full replacements, replacing the seal and collar is often sufficient. You should ask the plumber if simply swapping out the connector will resolve the problem before opting for a full pan replacement.
Be sure to use a WaterMark-certified connector. It's a legal requirement, and plumbers won't install non-certified parts. This is often what people really mean when they ask how do i drain a toilet during a repair job. From personal experience, paying a few dollars more for a good connector now means you won't need to call out a plumber down the road.
References
State and territory plumbing licensing authorities (Building and Plumbing Commission Victoria; Building Commission NSW / NSW Fair Trading; Queensland Building and Construction Commission; Plumbers Licensing Board Western Australia (administered by Building and Energy); Consumer, Building and Occupational Services Tasmania; Access Canberra ACT; Office of the Technical Regulator / Consumer and Business Services South Australia; Plumbers and Drainers Licensing Board Northern Territory)
AS/NZS 3500.2:2025 Plumbing and Drainage — Sanitary Plumbing and Drainage, Standards Australia
WaterMark Certification Scheme, Australian Building Codes Board


