How can you install a wall mount unity easily

Wall hung unities in the bathroom not only improve the look and aesthetics in your bathroom, but they come with several other benefits as well. They also come with a practical applicability which further increases their value potential. However, if you want to enjoy the experience of a wall unity, you need to install it in the right way. A wrong wall unity installation can make it fall off and injure your feet.

So, we thought of letting you understand how to install bathroom unity against wall safely and securely.

How to install bathroom vanity against wall securely?

Understanding the steps in how to mount floating vanity to wall an help you secure it so that there are no damages and injuries of any nature whether to the wall or to the users in future. We will check out the step by step wall hung vanity installation guide with the right steps and attention.

Step 1 – Arrange the materials

The materials needs for the wall hung vanity unit can include

– A piece of lumber with the size of at least that of the vanity.

– A cordless drill.

– A few deck screws.

– A saw

– A drywall knife

Step 2 – Before you begin
Before you commence working on the all unity, make sure that you are not going to alter the plumbing. In that case, you need to call up a registered plumber. Turn off the water supply before you begin working and turn on a tap so that the water pressure is released.

Remove the old wall hung vanity unit from the wall. Remove any of the tapware, and cut off the waste pipe. You can even cap the end of your water piped so that you can turn on the mains water line while you are working. Remove the screws and bolts used for the old unity.

Step 3 – Measure up rightly
The standard wall hung vanity installation height would be around 800 to 900 mm. However, you can measure up the height depending upon how high to install floating vanity in your case. Decide where exactly you want to install wall hung unity on the wall. Mark the height of new vanity on the wall. Ensure that the height is levelled. Mark the centre of the unity and make a corresponding marking on the wall.

Also locate the screws or mounting points of the unity and copy them onto the wall. Once all the markings have been made, you know for sure where exactly your wall hung vanity unit will go.

Step 4 – Fix the new Wall hung unity
Raise the unity to the height that you have marked on the wall. Make sure that you have used blocks of wood or anything solid that can help you keep the unity stable at the height. Relying on human efforts may not be the right way to go with it. The wood should be placed such that it elevates the mount to the final wall hung vanity installation height.

Using the wood blocks helps you mark exact mounting bolt without having to struggle to hold the vanity. These blocks can also be useful in the final installation.

Step 5 – Mark and drill
Mark the correct holes in the wall with a pencil. Use the right type of pencil so that you will not miss the markings. It would also be practical to mark the holes with a marker if the pencil marks are not clear. Using an impact gun or cordless drill, create holes in the wall to hold the vanity securely. You an use anchors for providing an additional security.

Step 6 – Secure the vanity with the bolts and studs
Finally, install the studs and bolts and tighten them up. Using a washer for the lag bolts can add more strength to the joint and can be the prime floating vanity support requirements. Some vanities come with a decorative caps for the studs. They ae designed to serve as decoration alone and may not be need otherwise. Use wall hung vanity brackets where you need them.

That does it. You have learnt how to install bathroom vanity against wall with ease. Remove the wooden blocks at the bottom. Check for the stability of the wall mounted unity and clear up the debris if any created while you were working on it. Check for the issues with wall hung vanity with floor drainage as well.

A few considerations in wall hung vanity installation

A few tips should be helpful in understanding the right installation of the hung vanity can ideally include

– When you install the tiles, ensure that you have transferred the markings to the tiles correctly. This should be of the important floating vanity support requirements.

– It may be a good idea to add more timber to the back of the plasterboard to give it enough strength.

– It would also be a good idea to add more support by adding support at the points that are not normally seen.

A few FAQs about Wall Hung Vanity Installation