- Your shopping cart is empty!
Solid Brass Bottle Trap in Chrome Surface 
Available
Solid Brass Bottle Trap in Chrome Surface
WAS $89.00 $59.00
-800x800.png "TEST-JIM/download (1)")
jadequestions
Have A Question For This Product?
There are no questions for this product.
Complete your bathroom with this premium basin bottle trap today! This solid brass basin bottle trap is a must to your bathroom, it suits all shapes and sizes of basins with a 32mm drain hole. It takes away the unsightly look of piping and leaves you with a stunning stand out chrome look.
Specification:
- Model : AL-BBT12C
- Material: Solid brass
- Chrome finish
- Suits 32mm pop up waste pipe
- G 1/4"
- NO overflow
- Height adjustable
- Complies with Australian Standard
- 5 years warranty
- Package Content:
- 1x Bottle trap
- Installation accessories
Installation:
- 1. Install the outlet pipe(trim outlet pipe as required) ensuring there is a minimum 1.5 degree fall. When taking measurements ensure the outlet pipe is fully engaged. Note - use a pipe cutter to trim the outlet pipe to size, ensure the cut end is deburred so it won't damage the O-ring.
- 2. Install the connection pipe to the 32mm plug & waste. Adjust the height as required, ensure there is a minimum 1.5mm degree fall on the outlet pipe.
- 3. Ensure all joints a firmly tightened. (DO NOT over tighten).
- 4. Test for leaks.
- 1. Install the outlet pipe(trim outlet pipe as required) ensuring there is a minimum 1.5 degree fall. When taking measurements ensure the outlet pipe is fully engaged. Note - use a pipe cutter to trim the outlet pipe to size, ensure the cut end is deburred so it won't damage the O-ring.
- 2. Install the connection pipe to the 32mm plug & waste. Adjust the height as required, ensure there is a minimum 1.5mm degree fall on the outlet pipe.
- 3. Ensure all joints a firmly tightened. (DO NOT over tighten).
- 4. Test for leaks.
Cleaning:
Clean with warm soapy water, DO NOT use abrasive or corrosive cleaners.
Related Products
