Q:Hr, I am looking for a black granite sink that would fit into an existing 980x450 cutout. Although the guide says this requires 480mm is it possible to install in a 30mm smaller cutout. Is the cut dimension actually measured from the template ?Hr, I am looking for a black granite sink that would fit into an existing 980x450 cutout. Although the guide says this requires 480mm is it possible to install in a 30mm smaller cutout. Is the cut dimension actually measured from the template ?
A: Hi there, thank you for your inquiry.
The cut out is usually measured from the specification sheet provided.
Q:Do u drill tap holeDo u drill tap hole
A: Sorry, we don't offer drilling service.
Q:Hi,
Is the sink a true matt black or does it have metallic flecks through it?
https://www.myhomeware.com.au/1000x500mm-black-granite-quartz-stone-1-and-1-4-kitchen-sink-double-bowls-drainboard-topmount
Thanks,
Kirsten Hi,
Is the sink a true matt black or does it have metallic flecks through it?
https://www.myhomeware.com.au/1000x500mm-black-granite-quartz-stone-1-and-1-4-kitchen-sink-double-bowls-drainboard-topmount
Thanks,
Kirsten
A: Hi Kirsten,
Thank you for your interest.
This granite stone sink is like Franke granite, having white spots on the surface.
Q:are the tap holes visable or are they a knock out type?are the tap holes visable or are they a knock out type?
A: Hi Jeff,
Thank you for your interest.
The drainage holes of these sinks are installed below the bottom level of the sinks.
Showing 1 to 4 of 4 (1 Pages)
There'll have slight sparkle effect due to mix of granite stone and acrylic.
The template is a guide only and it is highly recommended that your stone mason or installer cuts your bench top using the exact measurement of actual sink.
Model：TWM-NBD150
German engineered, Lifetime Warranty
Colour: NERA BLACK
High quality German quartz
Overall Dimensions(LxWxH): 1000x500x200/140mm
Bowl sizes(LxWxH):
Big Bowl: 365x424x200mm
Smaller Bowl: 145x280x140mm
Cut out size: 980x480mm (Reference Only, perfect cut out should be subjected to the physical sink)
Comes with two predrilled 35mm tap holes on both sides
With drainer board
Installation：Top Mount(If undermount, bench top must be 10mm thick at least)
Can be installed on either side(left or right)
Round corner for easy clean
High temperature resistance
Good stain resistance, non-stick oil, easy to clean
Scratch, acid and alkali resistance
Environmentally Safe & Green Low-Carbon Material
Unique anti-bacterial technology
Anti-corruption and anti-aging: with special corrosion-resistant and wear-resisting core technology
-800x800.png "TEST-JIM/download (1)")
